Advanced Installation Video
 

User Information

First Name:
Last Name:
Title:
E-mail:
Contact Information
Company:
Address:
 
City:
State:
Zip:
Area Code + Phone:
Fax:

Is this location a headquarters or branch office?



What is your primary business at this location? (Choose One)

1. Contractor or Services






2. In-house Lawn/Care Maintenance:

3. Distributor/Manufacturer:




4. Others Allied to the Field:



5. Other:

What best describes your title?

If Other:

What services does your business offer? (Check all that apply)

1. Landscape Design:


2. Landscape Installation







3. Landscape Maintenance:







4. Landscape Maintenance:




5. Other:








How Many full-time (year round) employees do you have?
What year was your business founded?
 
What is your company's gross annual revenues? (Choose One)












Please indicate your approximate business mix:

% Residential

% Commercial

% Other.

If other, specify type:


1. Once you dump the base material into the area, you want to:





2. After compacting the base material the first time, the next step is to:





3. An advantage to using the one inch putting green turf is:





4. When scraping the base to eliminate any dips or low spots:





5. The depth of the base has to be a minimum of:





6. The base material must be:





7. After scraping the base you want to drag a push broom across the base to:





8. In deciding where to place the cups on the base you need to:



9. When compacting the base material you want the base to be:





10. After you set the cup in your base you must:





11. The reason for the weed barrier on top of the ground before you add the base is to:





12. The slope of the base should be an average of:





13. To level the cup you should:





14. When adding an undulation or contour to your base you want your customer:





15. The last step before placing the putting green on the base is to hand tamp the base to:




16. As you are hand tamping the base you should:





17. As you are hand tamping the entire base and find an imperfection or small dip/low spot you should:





18. Clean the bottom of your hand tamp often to avoid:




19. Once you roll out the putting green on base you must brush the turf with the wire brooms to:





20. What kind of broom do you want to use to infill the green:





21. Using the new wire push brooms to sweep in the infill will





22. When coming up with the shape of your green you will use a:





23. Once the green is shaped, before you add a fringe turf you will:





24. What is the amount of infill needed per square foot on the 1 inch putting green turf:





25. When adding fringe to a green, the grain if the fringe turf must go:





26. When adding a fringe to the green, you will:





27. When nailing the fringe down you want to use:





28. When cutting the fringe next to the green, you need to:




29. Once the fringe has been cut, the space between the fringe and the green should be no more than:





30. When infilling the green, you have to fill it so the green is:





31. Once the green is half to three-fourth full of infill, due to the aggressiveness of the wire broom you will have to:





32. Why do you have your customer fill out their warrantee card and send it into us.





33. All Pro Greens has a large problem with contractors using our registered copy-written material such as brochure and pictorial magazine and selling a customer a competitors cheaper product. If you get caught doing this, All Pro will:





34. When brushing off the excess infill off the green, you want to brush cross grain from one side to the other. By brushing off the excess infill you will have:





35. The excess infill from the green can be used to infill the fringe. You will fill the fringe:





36. After cutting the hole for the cup use:





37. When rolling the turf you will:





38. Rolling the green: